AC Installation in Irving, TX — Residential HVAC Specialists

Your Home Deserves Cold Air You Can Count On.

$ ESTTIMATES FREE

Same-Day Free Estimates

Residential Specialists

English & Spanish

Mas Heating & Airconditioning has been installing and replacing AC systems across Irving and the DFW area for over 12 years. We work exclusively with residential homes — no commercial rush, just focused attention on your house, your budget, and your timeline.

Is It Time to Repair — or Replace — Your AC?

If your system is over 10 years old and your repair quote is climbing toward $1,000 or more, replacement is almost always the smarter investment. A new AC installation in Irving, TX gives you lower energy bills, a full manufacturer warranty, and the peace of mind that comes with a system built for the next 15 years — not patched for another summer.

Not sure which way to go? We'll walk you through it honestly. No upsells, no pressure.

Get a Free Replacement Assessment

Mas Heating and Cooling technician performing a residential AC installation in Irving, TX.

Signs Your Home Needs a New AC Installation

Uneven Cooling or Constant Cycling

Some rooms freezing while others stay warm, or a system that short-cycles every few minutes, usually signals either a refrigerant problem, a failing compressor, or a unit that was never the right size for your home. All three are solved at the root by a correct installation — not another patch.

Your Energy Bills Keep Climbing

An aging or undersized system runs longer to reach the same temperature — and you pay for every extra minute. A properly sized new AC installation, matched to your home’s square footage, can reduce cooling costs by 20–40% compared to a failing unit.

Repair Costs Are Stacking Up

One repair is normal. Two in the same season is a pattern. When cumulative repair costs approach 50% of a new unit’s price, every HVAC professional will tell you the same thing: replace it. We can show you the math on your specific situation.

Your System Is 10–15 Years Old

The average central AC unit lasts 12–15 years in Texas’s climate. After that threshold, efficiency drops, refrigerant costs rise, and breakdowns become frequent. If your system is approaching or past that window, an AC installation now prevents an emergency replacement in the middle of July.

Mas Heating & Airconditioning LLC provides residential AC installation and full HVAC system replacement across Irving, TX and surrounding DFW communities. With over 12 years of hands-on experience installing central air systems, split units, and heat pump configurations, our team handles every installation from load calculation to final startup test — ensuring your new system runs right from day one. We serve homeowners in Irving, Coppell, Arlington, Grand Prairie, and Dallas with transparent pricing and a bilingual team ready to answer every question in English or Spanish.

AC Installation Options for Irving Homes

AC installation in Irving, TX by Mas Heating and Cooling residential HVAC specialists.

Central Air Conditioning Installation

The most common choice for Irving homes with existing ductwork. A central AC system — typically a split system with an outdoor condenser and indoor air handler — delivers whole-home cooling efficiently and quietly. We size every system using a Manual J load calculation, not guesswork, so your new unit is neither oversized nor undersized for your specific home.

Best for: Homes with existing ducts, whole-home cooling needs, budgets of $3,500–$7,500+ depending on tonnage and efficiency.

AC installation service in Irving, Texas by Mas Heating and Cooling technicians

AC Replacement (Same Footprint, New Equipment)

If your existing system layout is sound but the equipment has failed, a like-for-like replacement is the fastest path back to comfort. We remove the old unit, install the new system in the same location, connect to existing ductwork, and have you running the same day in most cases.

Best for: Systems 10+ years old with functioning ductwork, homeowners who want minimal disruption, fastest timeline.

AC installation of a residential outdoor unit by Mas Heating and Cooling in Irving, TX.

Full HVAC System Installation

When you're replacing both the cooling and heating systems together — or installing HVAC in a home that never had it — a full system install covers the air handler, condenser, refrigerant lines, and thermostat as a matched set. Matched systems from the same manufacturer typically perform more efficiently and carry better warranty coverage than mismatched components.

Best for: Homes replacing AC and furnace simultaneously, new construction additions, homes upgrading from window units to central air.

Ductless Mini Split Installation

For additions, garages, sunrooms, or homes without ductwork, a ductless mini split delivers zoned cooling without the cost of running new ducts. We install single-zone and multi-zone systems depending on the areas you need to cool.

Best for: Additions, converted spaces, homes without existing ductwork. → Learn more about ductless mini split installation in Irving

Our AC Installation Process — Step by Step

3

Scheduled Installation Day

Most residential AC installations in Irving are completed in a single day. Our team arrives on time, protects your floors and work areas, and handles the full removal and installation — including refrigerant charging, electrical connections, and thermostat setup.

2

Transparent Quote — No Hidden Fees

You receive a written quote covering equipment, labor, disposal of the old unit, and any ductwork modifications needed. The number we quote is the number you pay. We discuss financing options at this stage if needed.

1

Free In-Home Assessment & Load Calculation

We visit your home, measure your square footage, assess insulation, window exposure, and existing ductwork condition, and run a proper Manual J load calculation. This determines the correct tonnage and SEER rating for your specific home — not a generic size guess.

4

Startup Test & System Walkthrough

Before we leave, we run a full startup test: verifying airflow, checking refrigerant charge, confirming thermostat operation, and testing every zone. We walk you through your new system's operation, filter schedule, and warranty documentation.

5

Post-Installation Suppor

Have a question a week after installation? Call or text us. We stand behind every AC installation we complete in Irving and the surrounding area. → Schedule your first annual tune-up

What Does AC Installation Cost in Irving, TX?

Pricing depends on system type, tonnage, efficiency rating (SEER2), and any ductwork modifications needed. Here are realistic ranges for Irving residential homes:

Central AC Replacement (equipment + labor)

Most Irving homeowners pay between $3,500 and $7,500 for a standard central AC replacement, including removal of the old unit. Higher-efficiency systems (18+ SEER2) run toward the upper end but deliver meaningful long-term savings on energy bills.

AC installation of a residential outdoor unit by Mas Heating and Cooling in Irving, TX.

Full HVAC System (AC + Air Handler or Furnace)

Combined system replacements typically range from $6,000 to $12,000+, depending on system size and whether ductwork modifications are needed.

Ductless mini split installation in Irving, TX

Ductless Mini Split (single zone)

Single-zone ductless systems in Irving generally run $2,500 to $5,000 installed, including the outdoor unit, indoor head, refrigerant lines, and electrical work.

We provide written quotes before any work begins. No surprise charges on installation day.

Not Ready to Replace Yet? We Still Have You Covered.

If your system has a few good years left, our AC repair and AC tune-up services keep it running efficiently until replacement makes sense. We'll always give you an honest recommendation — repair when it's worth it, replace when it isn't.

AC Installation Across Irving and DFW

We install and replace AC systems throughout Irving, TX and the surrounding communities. Whether you're in Las Colinas, Valley Ranch, or West Irving, our team covers your neighborhood with the same response time and same flat-rate pricing. We also serve homeowners in Coppell, Arlington, Grand Prairie, and Dallas with no additional travel fees for most service areas.

Our team understands the specific demands of DFW summers — 100°F heat indices, older housing stock, and homes that were never sized correctly the first time. Every AC installation we complete is engineered for this climate, not copied from a national franchise handbook.

Residential heating installation in Irving, TX performed by Mas Heating technician

Frequently Asked Questions — AC Installation in Irving, TX

How long does a residential AC installation take in Irving?

Most standard central AC replacements are completed in 4 to 8 hours — a single day for most homes. Full HVAC system installs (AC + air handler or furnace) may require a second day if ductwork modifications are needed. We confirm the timeline in writing before your installation date.

Sizing is determined by a Manual J load calculation — not just square footage. We account for your home's insulation, ceiling height, window area, sun exposure, and duct condition. An oversized unit short-cycles and leaves humidity problems; an undersized one runs constantly and never fully cools. We size every installation correctly from the start.

If your air handler and condenser are from different years or different manufacturers, replacing only one component often reduces efficiency and may void the manufacturer warranty on the new part. In most cases, replacing the matched system together delivers better performance and a cleaner warranty. We'll show you the cost comparison either way.

Yes. Old unit removal and disposal is included in every AC installation quote we provide. We handle refrigerant recovery in compliance with EPA regulations and dispose of equipment responsibly. No extra charges, no equipment left in your yard.

We work with multiple major residential HVAC manufacturers and recommend equipment based on your budget, home size, and efficiency goals — not brand commissions. We'll tell you which systems offer the best warranty and reliability for your specific installation.

Yes. We install AC systems throughout the Irving service area and surrounding DFW communities including Coppell, Arlington, Grand Prairie, and Dallas. Contact us to confirm availability for your specific address.

Ready for a New AC Installation in Irving? Let's Talk.

A new system is a significant investment — and you deserve straight answers before you commit. Call or text us for a free in-home assessment and written quote. Our bilingual team is available 7 days a week, 8 AM to 8 PM, with after-hours availability for urgent situations.

(214) 530-6579

3026 Steven St
Irving, TX 75062

Open today: 8 AM – 8 PM
7 days a week

Bilingual: English / Español

After-hours emergency service available with additional fee — disclosed before work begins.